ReForm is a sustainable initiative within to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable without having to make compromises on material properties and yet keep it affordable.
ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.
Unique features
- 100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA.
- Less environmental impact by quality controlling and re-using extrusion waste streams
- Sustainable packaging
- ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools
- ReForm filament is packaged in recycled carton boxes
- Biodegradable
- Compliant to FDA food and drink contact articles
- Very easy to print
- Warp-free printing and no deformation after cooling
- Improved flowing behaviour and inter-layer adhesion
- Good first layer adhesion to several (un)heated print surfaces
General printing guidelines *
|
Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 100% |
|
Print temp: ± 180 – 220 C |
Print speed: Medium |
Retraction: Yes – 5mm |
|
Heat bed: ± 0 – 60 C |
Fan speed: 50-100% |
Experience level: Beginner |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
|
: 1.24 g/cc |
50 gr coil |
1 Kg spool |
|||
|
Ø 1.75mm |
± 16.8m |
± 335m |
|||
|
Ø 2.85mm |
± 6. |
± 126m |
Product export information
|
HS Code: 39169090 |
Description: Monofilament |
Country of origin: the Netherlands |
*) FDA compliant filament is specifically made of FDA compliant polymers for direct food contact/containers or raw plastic material for 3D Printing Prototyping and Manufacturing. This filament is made to meet the requirements for the use in Food Contact Articles. Please note that the filaments do not have an actual FDA listing number.
*) RoHS REACH compliance in accordance with: RoHS Directive 2011/65/EC — REACH Directive 1907/2006/EC.
Reviews
There are no reviews yet.