1 x Hydraulic Hand Pump / 1 x Hose / 1 x 10-ton Ram / 1 x Spreader Ram / 3 x Extension Tubes / 1 x Male connector
1 x Flat base / 1 x 90 Degree V Base / 1 x Wedge Head / 1 x Spreader Plunger Toe / 1 x Spreader Ram Toe
1 x Flex Head / 1 x Serrated Saddle / 1 x Carry case / 1 x User Manual
Item Specifications:
1 x Flat base / 1 x 90 Degree V Base / 1 x Wedge Head / 1 x Spreader Plunger Toe / 1 x Spreader Ram Toe
1 x Flex Head / 1 x Serrated Saddle / 1 x Carry case / 1 x User Manual
Item Specifications:
Color: red
Size:73cm*40cm*18cm
N.W.:29kg
G.W.:31kg
Load Capacity: 10 tons
Jack Power Type: Hydraulic
Max Lifting Height: 130 mm
Cylinder
Min Height:330 mm
Working Pressure: 62 Mpa
Oil Be Filled: 500 g
For Load:
Size:73cm*40cm*18cm
N.W.:29kg
G.W.:31kg
Load Capacity: 10 tons
Jack Power Type: Hydraulic
Max Lifting Height: 130 mm
Cylinder
Min Height:330 mm
Working Pressure: 62 Mpa
Oil Be Filled: 500 g
For Load:
Maximum load can not exceed the rated capacity.
The load can not exceed the half of the capacity when all tubes used.
The extension of the piston can not exceed the stroke.
The load can not exceed the half of the capacity when all tubes used.
The extension of the piston can not exceed the stroke.
For Safety:
Working oil:No 10
Check the level of oil if it is not sufficient please add the same hydraulic oil.
After using close the valve with the cover to keep the oil free from the dust and dirt.
Before lifting adjust the jack slowly to make the load coaxial with resnect to jack.
Tube can not be bent near to the catting tools and fires also can not put weight on it.
Check the level of oil if it is not sufficient please add the same hydraulic oil.
After using close the valve with the cover to keep the oil free from the dust and dirt.
Before lifting adjust the jack slowly to make the load coaxial with resnect to jack.
Tube can not be bent near to the catting tools and fires also can not put weight on it.
Note before operation:
Reviews
There are no reviews yet.